1, empty running when the installation is complete, you can run empty, you must jog test chain sprocket should be turned on more than two weeks before the empty running, no touching or abnormal sound card before running continuously empty . In the process of running empty empty car to the main motor timely measure current, voltage and record, while measuring gear parts each bearing temperature, bucket head tail each bearing warming. After 4 hours of running empty, if no abnormal phenomenon can stop the fixing Douzi tighten all bolts again. Because at this time Satoko in empty running already in the appropriate position, and then tighten the screw to run more than four hours of empty parking Satoko once again tight coupling bolts, bolts After welding the bolts and nuts with a good spot. 2 plus load operation when running empty, bucket elevator has had the run of the load conditions, coupled with recognition of other devices connected to the load can be no question after the operation, when the load operation began ascending gradually increasing the load until Maximum load equipment so far. Load operation, timely measure current, voltage, and temperature rise of the motor bearings and recorded, in order to test for the state of the whole work performance assessed. After 3 Operation 1) linkage test starts when the load is complete, bucket elevator will have normal operating conditions, empty before work started 1-3 minutes after feeding stable operation and gradually increase the amount until the full load operation . 2) After stopping when to stop feeding, confirmed bucket elevator bucket www.smjixie.com yard material have been removed, and then run for a period of time and then shut down to ensure that all materials yard bucket down light.